Saturday 28 March 2020

2 Freightcars 2nd Time Across the Workbench

Back in February I posted up a couple of Exactrail Evans boxcars, including this one.  It was actually one of two that I had weathered and patched to GTW reporting marks.  I half-threatened in that post that maybe I should or would re-work it to something I'd like a little better.  Well, that maybe has turned into this post.

I also had this other Exactrail Evans boxcar in my cupboard that I didn't at all like the way it had turned out.  Here's what it looked like, below.  No one wanted to buy this at the Woodstock train show last year either, and really, I don't blame them. I mean, the rust streaks were alright, but the blue patching was "overpowering" at best, and I hadn't faded the original blue down properly.  (I like to think I'm getting better at that now).

I figured that as long as I was going to re-do one car, I might as well re-do two.  So, out came the 99% alcohol and Q-Tips, and over the course of the next hour or two, off came the weathering and the patching.

With that done, I faded the original Rock Island blue with ModelFlex Concrete Gray.  That's such a great colour for fading paint.  I masking-taped off the areas I wanted, and sprayed a light gray where the patches were to go.  Reporting marks and numbers decals were re-done as well, and then the rust weathering added.

So now 598324 (seen above with the white patches) has become former GTW 598211, and looks like this...
The notice on the tack-board is a tiny piece of an orange price tag sticker.  I faded the colour of it with some thinned grey paint and stuck it on there.  If it falls off, well that's prototypical, and it'll just add to the litter that's scattered around the railway.

And a view of the other side...
The pieces of old tape seals at the door are small bits of white decal.  The door on this side received less of the fading, and is closer to the original colour of the model

And as for the boxcar that had the overpowering blue patches, it went through the same basic process as above, just masked and patched differently.  

Here's a look at the prototype photo that inspired the patching for this 2nd car. This photo by Randy Curlin, found on rrpicturearchives.net

I kept the colour difference from the new patching and the faded blue is much more subtle on this one. Here's a look...
I've painted one door with the same grey paint that I used for the patching.

And the other side...

And here are the two GTW patched boxcars together...
I like both of these boxcars much more now than before, so they'll probably see more time on the layout.

Stay safe out there everyone, and stay home.

Jim


3 comments:

  1. You have done a great job Jim with these cars...I don't think you will be having any problem selling them at the Woodstock train show if there ever is another show...George

    ReplyDelete
  2. Thanks very much George for the nice words. I actually have another ROCK one that's still in the box waiting for me to get around to it. My guess right now is that it'll look quite similar to these when done.

    Jim

    ReplyDelete
  3. Nice job on these. Big improvement.

    The new-looking ACI on the first one bothers me (it would be as old as the car).. and the data in the top box of the COTS (refreshed/patched every few years) is too faded on the second car.. But, yeah, man, yeah. Nice redo!

    ReplyDelete